Generally the drain leak cleanup required for clean water damage is far less. All you have to do is completely dry out your home. After everything has dried, check for mold. By leaving all windows and doors open, your home will dry much more quickly.
When you get to the house stand if front of the toilet and locate the water shut off valve. Should be down below the toilet on the wall. Just turn it off (righty-tighty) completely and flush the toilet. All the water should have left the tank, well at least most of it. If there is remaining water line repair get it out with paper towels or a rag. The important thing is that no more water came in. If it did then your valve is not shut all the way or not working and you need additional help.
After you have the stems out you should be able to find the washer on the "inside" end. If it is nicked, torn or brittle it is likely the cause of your drip. Even if it looks brand new, go ahead and replace it. You've already come this far. You can get replacement washers at almost any hardware store. Sometimes you may want to replace the whole stem, especially if the handle end is stripped out. It's best to just take the stem with you to the store and see if you can match it up. Most Do It Yourself stores have replacement stems for many popular brands. If your valve has a center diverter valve to switch the waterfrom the tub spout to the shower head the same process applies. Many times it is easier to replace the diverter stem than to repair it. This really depends on the design of the stem.
Service magic only let's licensed and insured tradesmen advertise on the site so that would be a great place to start. I would recommend getting at least three different quotes from different companies. This way you have an exact price of how much your works are going to cost and you will know exactly what you are getting for your money. You will also get the very best price for that work. Most plumbers will often try and sell you work that maybe you don't need as they are trying to make a living.
Remove the cap of the faucet using slip-joint pliers. Tape the teeth of the pliers to prevent damage of the surface. Remove the faucet cam washer and water line repair the rotating ball.
There are a lot of different shapes and styles of toilets but, with a few exceptions, they all work about the same. Water is released from the tank (many commercial toilets use a special valve instead of a tank) into the bowl to flush the waste into your drainage piping. Basically pretty simple, right?
Windshield repair techs come and go on a daily basis. The majority struggle to survive. Most fail. It's not that they're not good at what they do, it's not that they don't have the skills, it's not that they're not willing to work hard, it's their lack of MARKETING Training. That's the bottom line: It all comes down to proper marketing strategies.